Hot products
- 5mm平头透明光敏PT850B5C
- 光耦CXD5C2 CXD5C3 CXD5C4 CXD5C7 CXD5C10 替VTL5C
- LT9909 9910 9911 9912 9913 9914光耦
- 5mm光敏电阻蓝玻滤光片Φ5X1.0mm
- 4mm光敏电阻套5X6.5mm双孔
- 5mm光敏电阻防护罩PC0513K
- 5mm光敏电阻套7X11mm双孔
- 5mm光敏电阻套7X8.5mm圆孔
- 5mm光敏电阻套6X8.5mm双孔
- 3528贴片滤红外光敏PTSMD3528H
- 3mm平头滤红外光敏PT550F3H
- 0603 patch photosensitive CXDSMD023
- 5mm光敏电阻 GL5506 5516 5528 5537 5539 5549
- 12mm光敏电阻 GL12516 12528 12539 12549
- 3mm平头雾状光敏PT850F3F
- 0805贴片光敏PTSMD021
- 5mm平头滤红光敏PT550B5H
- 5mm光敏电阻蓝玻组合
Industry news
Application of dissolved oxygen monitoring in sewage treatment project
2019-03-02 20:24:14
In tropospheric atmosphere, atmospheric pollutants mostly diffuse vertically or horizontally from the ground, while solar radiation, as an important driving force of atmospheric chemical reactions, transmits from top to bottom. Therefore, the study of atmospheric environmental chemistry should not only focus on near-surface pollution, but also on the changes of atmospheric structure and composition in a certain height range (especially in the boundary layer), otherwise it is difficult to fully reveal the actual atmospheric chemical reaction process in the troposphere.
Previously, many vertical monitoring methods of atmospheric environment have been applied, such as atmospheric boundary layer tower, manned aircraft, balloons and airships. However, the boundary layer tower is fixed, usually below 300 meters in height, and built in urban areas; manned aircraft can only fly at altitudes of hundreds of meters or more; balloons or balloons have poor wind resistance and mobility, and need to be filled with large amounts of helium, and the cost of a single operation is high. These methods have been unable to meet the needs of air pollution research in the new era.
The maneuverability and flexibility of UAV can effectively remedy the above shortcomings and make the previously inaccessible areas easy to reach. Combining the atmosphere monitoring sensor with UAV, and establishing the sensor system monitoring through the network, UAV has the advantages of three-dimensional monitoring, fast response, wide monitoring range and small terrain interference. It will be used to identify and concentrate the pollution sources of atmospheric emergencies in the future. Monitoring is one of the important development directions.
The standard monitoring parameters of UAV atmospheric monitoring system include carbon monoxide, sulfur dioxide, nitrogen dioxide, ozone, volatile organic compounds and particulate PM2.5, PM10, etc. The UAV collects data after arriving at the target site, and transmits the collected data to the ground data processing system through GPRS for processing and analysis.
-
UAV atmospheric monitoring system mainly includes UAV, gas detection sensor, data transmission/GPRS, ground station/server, data processing software and so on.
The detection methods of sensor components in monitoring module mainly include electrochemical detection (measuring SO2, CO, NO2, O3 and other conventional gases), photoelectric particle detection (measuring VOCs, etc.), laser scattering detection (measuring PM2.5, PM10, etc.).
Previously, many vertical monitoring methods of atmospheric environment have been applied, such as atmospheric boundary layer tower, manned aircraft, balloons and airships. However, the boundary layer tower is fixed, usually below 300 meters in height, and built in urban areas; manned aircraft can only fly at altitudes of hundreds of meters or more; balloons or balloons have poor wind resistance and mobility, and need to be filled with large amounts of helium, and the cost of a single operation is high. These methods have been unable to meet the needs of air pollution research in the new era.
The maneuverability and flexibility of UAV can effectively remedy the above shortcomings and make the previously inaccessible areas easy to reach. Combining the atmosphere monitoring sensor with UAV, and establishing the sensor system monitoring through the network, UAV has the advantages of three-dimensional monitoring, fast response, wide monitoring range and small terrain interference. It will be used to identify and concentrate the pollution sources of atmospheric emergencies in the future. Monitoring is one of the important development directions.
The standard monitoring parameters of UAV atmospheric monitoring system include carbon monoxide, sulfur dioxide, nitrogen dioxide, ozone, volatile organic compounds and particulate PM2.5, PM10, etc. The UAV collects data after arriving at the target site, and transmits the collected data to the ground data processing system through GPRS for processing and analysis.
-
UAV atmospheric monitoring system mainly includes UAV, gas detection sensor, data transmission/GPRS, ground station/server, data processing software and so on.
The detection methods of sensor components in monitoring module mainly include electrochemical detection (measuring SO2, CO, NO2, O3 and other conventional gases), photoelectric particle detection (measuring VOCs, etc.), laser scattering detection (measuring PM2.5, PM10, etc.).